Loading... Please wait...
  • Nitecore LR10 USB Rechargeable Pocket Lantern
  • Pocket size
  • Stainless steel hang loop folds out
  • Lights up the night
  • Nitecore LR10 USB Rechargeable Pocket Lantern
  • Hang from a hammock ridgeline with a micro carabiner
  • Nitecore LR10 USB Rechargeable Pocket Lantern
  • Compact and light
  • Easily slips in your pocket or pack
  • 1 simple button - 3 brightness levels & 3 rescue modes
  • 3 rescue modes
  • Specifications
  • Micro USB rechargeable
  • Works while charging
  • Integrated, high-capacity battery equal to 4 AAA batteries
  • Over 500 recharge cycles
  • Battery power indicator
  • Location indicator
  • High CRI warm neutral white light
  • High CRI for more vivid, natural color
  • Constant illumination prevents glare and reduces fatigue
  • Adapts performance to the temperature
  • Flexible printed circuit heat dissipation
  • IP66 rated for dust and water protection
  • Built-in hang loop & magnetic base
  • Features

Nitecore® LR10 USB Rechargeable Pocket Lantern

$38.95
$46.95 (You save $8.00)
Qty
    • Pocket-size lantern
    • 9 high-CRI LEDs, evenly diffused
    • 360° illumination
    • 250 lumens, runtime up to 38 hours
    • 3 brightness levels, 3 rescue modes
    • Mounting loop & magnetic base
    • Hang from a tent/tarp hook, hammock ridgeline, tree branch
    • Built-in, Li-Ion micro-USB rechargeable battery
    • Recharge with a power bank battery

     

    Nitecore® LR10 is a pocket-sized USB rechargeable lantern with 3 brightness levels up to 250 lumens plus 3 rescue modes and a runtime of 38 hours on low. It’s smaller and lighter than most solar lanterns, just 2.12 oz (60.2 g) and the size of a travel deodorant. And to recharge, simply plug into a power bank.

    Nine high-CRI LEDs provide evenly diffused, 360° illumination. So you can light up your cooking area while preparing and enjoying dinner. Light up your social circle while recalling the day and discussing your plans for the next. Light up your tent/tarp/hammock to organize your gear or read a map. Or light up the path to middle of the night relief.

    lr10-cri-200h.jpg

    LR10 utilizes warmer neutral white LEDs with high CRI ≥ 90 for more vivid, natural color and reduced eye strain. CRI (Color Rendering Index) is a measurement of how colors look under a light source as compared with sunlight. The index is measured from 0-100, with a perfect 100 indicating colors under the light source appear the same as they would under natural sunlight.

    To keep it simple, a single button controls both Power and Mode. Press and hold once for low light. Repeatedly press the button to cycle from low>medium>high>low. Then press and hold once to turn off.

    There are also three rescue modes – caution, SOS, and location beacon. Caution repeatedly flashes on and off, SOS repeatedly flashes SOS in Morse code (. . . ––– . . .), while location beacon repeats a quick flash followed by a short delay. To reach rescue modes, press the button twice for caution. Repeatedly press the button to cycle from Caution>SOS>Beacon>Caution. Press and hold once to turn off.

    Mode Output (lumens) Turn On Turn Off
    Low 8 Press & Hold Once Press & Hold Once
    Medium 65 From Low, Press Once Press & Hold Once
    High 250 From Medium, Press Once Press & Hold Once
    Caution 250 From Off, Press Twice Press & Hold Once
    SOS 250 From Caution, Press Once/From Off, Press Three Times Press & Hold Once
    Beacon 250 From SOS, Press Once/From Off, Press Four Times Press & Hold Once

     

    LR10 has a built-in, long-lasting 1200 mAh Li-ion rechargeable battery that holds power equal to four AAA batteries yet is much more sustainable. An intelligent protective charging circuit and a Micro USB connection make it easy to recharge. Since you probably already carry a spare battery to charge your phone, there’s no need to worry about running out of power or replacing batteries, just plug into a power bank, wall charger, computer, or car (USB cable provided). The light maintains full functionality while charging.

    Want to know how much battery power is left? With the light turned off, press the button once. The button will flash 3 times if you have more than 50% power, 2 times if you’re below 50%, and 1 time if you’re below 10%. Plug it in and an indicator light lets you know when the charge is complete. It takes approximately 3 hours to fully charge the battery. A rubber cover protects the USB port from dirt and moisture.

    Charging State Indicator Light
    Charging Steady Red
    Charging Complete Steady Green

     

    The power-level indicator doubles as a location indicator to help you find the lantern in the dark. With the light on, hold down the button for 3 sec to turn the light off and also activate the red indicator light to flash once every 2 sec. When fully charged, the location indicator will operate for 6 months. Turning the light on deactivates the location indicator.

    LR10 has an integrated, stainless steel mounting loop for hanging that folds flat out of the way when not in use. Hang it from a hook inside your tent/tarp. Use a micro carabiner to clip to your hammock ridgeline, zipper pull, or a small tree branch. LR10 also has a magnetic base to attach to any magnetic surface. Great in a roadside emergency or a power failure at home or work. 

     

    Specifications

    Mode Output (lumens) Runtime (hours) Beam Diameter ft (m) Beam Intensity (cd)
    Low 8 38 11.2 (3.4) 0.75
    Medium 65 5.25 39.4 (12) 9
    High 250 1 78.7 (24) 38
    Caution 250 - - -
    SOS 250 - - -
    Beacon 250 - - -

     

    LED: 9x High CRI LEDs

    LED Color Temperature: 4500 K, Neutral White

    Color Rendering Index (CRI): CRI ≥ 90

    Battery: Built-in rechargeable Li-Ion, 1200 mAh

    Lighting Modes: Low/Medium/High/Caution/SOS/Beacon

    Beam Diameter: 78.7 ft (24 m)

    Beam Pattern: 360°

    Peak Beam Intensity: 38 cd

    Body: Polycarbonate, impact resistant

    Switch: Side Power/Mode button, rubber

    Charging Connection: Micro USB, rubber cover (USB cable provided)

    Charging Time: 3 hours

    Dimensions, Lantern (LxWxH): 2.58 x 1.97 x 0.8 in. (65.5 x 50 x 25 mm)

    Mounting Loop Inside Dimensions (WxH): 0.85 x 0.86 in. (21.7 x 21.9 mm)

    USB Cable Length: 3.3 ft (1 m)

    Weight

       Lantern: 2.12 oz (60.2 g) with built-in battery

       USB Cable: 0.79 oz (22.5 g)

    Impact Resistance: 4.9 ft (1.5 m)

    Ingress Protection Rating: IP66, complete dust protection and high-pressure water jet resistant

    Included

       1x Lantern with integrated USB rechargeable Li-Ion battery

       1x Micro USB to USB charging cable

      

    User Manual

    Nitecore LR10 User Manual

     

    yellow-background-caution-100x20.png 

    • Very bright light, to avoid eye injuries, DO NOT stare directly into the light and DO NOT shine the light directly into the eyes of others.
    • Keep away from children to avoid injury.
    • DO NOT use if battery is damaged to avoid fire or explosion.
    • Charge in or on a fire-proof surface to avoid possible injury. DO NOT charge unattended.
    • Charge only at temperatures between 32-113°F (0-45°C) to avoid permanent damage and possible fire or explosion during charging.
    • Recycle or dispose of properly according to local regulations at end of life, DO NOT dispose in fire or incinerator as battery may catch fire and explode.

    In no event shall Litesmith, LLC be liable for any direct, indirect, punitive, incidental, or special consequential damages, to property or life, whatsoever arising out of or connected with the use or misuse of its products.

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    Sign up for our newsletter

    Electronic Payments

    View Cart Go To Checkout