Jetza™ Bottle Bidet

• Simple screw-on bottle cap
• More powerful stream
• Low water usage
• Smaller and lighter
• Snaps to Kula Cloth®

Leave the TP at home and learn to bidet. You’ll feel cleaner, smell fresher, and have one less thing to pack out when backpacking. And you won’t have to worry about ‘no toilet paper’ in public bathrooms and porta potties on travel or at festivals.

Jetza™ is a portable bottle bidet to power wash your booty and rinse off downstairs. It’s a simple screw-on cap that works with any narrow-mouth water/soda bottle with a 28 mm thread, the standard found in the US and other parts of the world. It even works on water bladders like CNOC, Platypus, Evernew, and Sawyer. Easy to install, no o-ring wetting required, and easy to remove. Keep it connected to your bottle with a Bottle Tether or snap it to your Kula Cloth for quick access with a Kula Tether.

Water can be precious when you're off the beaten track. Most bidets have a large spray slot, forcing you to squeeze harder, and one use has you going back for more water. Jetza has a smaller, more powerful stream, optimized for a shiny heinie while conserving critical water. And Jetza’s half the size and half the weight of others.

Guys will squirt from the back, ladies from the front. The protruding nozzle makes it easy to see or feel where to aim. Use a drop or two of biodegradable soap to wash first if you like. A soft squeeze for the frontside and a little harder for the backside. After you spray, air dry for a bit and you’re good to go. Women may want to use a Kula Cloth to pat dry in the front. Practice in the shower at home before taking on your next adventure.

Jetza covers the bottle threads to keep them clean, unlike o-ring mount bidets. However, if you’re really concerned about splash back, use a dedicated bottle. 

Compatible 28 mm Bottles/Bladders

• Smartwater
• LIFEWTR
• Essentia
• Aquafina
• Desani
• Coke/Pepsi
• CNOC
• Platypus
• Evernew
• Sawyer
• All other 28 mm threaded bottles/bladders
• NOT compatible with the common smaller single-use thin-wall water bottles

Specifications

Package: 1 Bidet, Tethers are optional

Thread: 28 mm, standard water/soda bottles found in the US and other parts of the world

Material

     Bidet: Thermoplastic derived from plants (eco-friendly/biodegradable/BPA free) and TPU (BPA free)

     Bottle Tether: TPU

     Kula Tether: TPU with a plastic snap

Dimensions

     Bidet (Dia x H): ø1.38 x 0.45 in. (ø3.49 x 1.14 cm)

     Bottle Tether: 2 in. (5.1 cm) length, bottle edge to bidet center

     Kula Tether: 1.65 in. (4.2 cm) length, snap center to bidet center

Weight

     Bidet: 0.15 oz (4.2 g)

     Bidet + Bottle Tether: 0.19 oz (5.4 g)

     Bidet + Kula Tether: 0.2 oz (5.6 g)

Made in USA