VectoX Water Bladders - 42mm Wide Mouth

BeFree filter compatible only, NOT compatible with Sawyer filters

• Thicker, tougher, more durable than Vecto
• Handles boiling water
• Dual openings – wide scoop + screw-on cap
• Easy to fill from a shallow, low-flow stream
• BeFree filter compatible
• Simple to clean, quick to dry
• Tethered cap and slide can’t be lost

VectoX is a collapsible water bladder with a unique dual opening for quick, easy filling. One end has a wide opening with a slider seal while the other end, a 42 mm wide mouth screw-on cap. The wide opening makes it easy to scoop water, even from a shallow, low-flow stream. No need for a separate scoop to fill this bladder. The cap and slide are tethered to the bladder so they can’t be lost.

VectoX is made of eXtra tough TPU for adventurers who demand more from their gear. The bladder is soft yet stands up to 450 lb (200 kg) of force. It’s thicker and more durable than the classic Vecto yet easier to squeeze than most standard bladders. VectoX even handles boiling water. TPU is FDA approved and BPA free.

Filter Compatibility

VectoX 42 mm Wide Mouth is compatible only with the popular BeFree water filter by Katadyn (not compatible with Sawyer filters). Just scoop water, seal with the slider, screw on the filter, squeeze the bladder, and voila – clean water. Simple. Or set up a gravity filter using two Vectos, a 42 mm for dirty water and a 28 mm for clean. Screw a Coupling to the BeFree to attach the 28 mm narrow mouth bladder. Use two different color Vectos to help identify the dirty bladder. Hang from the hole in the slider or tie a cord through the hole for a larger loop.

The wide opening makes VectoX very easy to clean. No special brushes or tablets needed. Get your whole hand in there with a soapy sponge and hot water to thoroughly clean the inside. Standard bladders can take a week to dry. VectoX dries quickly with the large opening.

Specifications

Material

     Bladder: TPU, FDA approved, BPA, BPS, and BPF free

     Cap: Polypropylene (PP)

     Slider: ABS

     Slider Tether: TPU

Opening, Cap-Side: 1.37 in. (34.8 mm) diameter

Operating Temperature: 0 to 212°F (-17 to 100°C)